OBD OBD Code Guide

Car Cranks But Won't Start

The starter turns the engine normally but it never fires. That separates it from a battery problem and points at spark, fuel, or the crank signal.

What it feels like

Codes that usually produce this

Check these first, in this order

Free checks first. Nothing here costs money except the fuel you burn.

  1. 1

    Watch rpm on the scanner while cranking. This one reading splits the diagnosis in half.

    What you'll seeA reading of 200 to 300 rpm while cranking. A flat zero means the computer sees no rotation.

  2. 2

    Listen at the fuel filler with the key on for two seconds. A faint whine means the pump is priming.

    What you'll seeA short hum from the tank. Silence means check the pump circuit before anything else.

  3. 3

    Check the battery voltage at rest and while cranking with a meter on the posts under the hood.

    What you'll seeAt least 12.4V at rest and above 10V during crank.

Stop and get it looked at if